If you’re in the market for a new water heater and want to install it yourself, we’ve got your back. How Hard Is It To Install A Water Heater? Well, we know that installing a water heater can be difficult. In this article, we will share everything you need to know about how hard it is to install a water heater so you can start saving on installation costs!
What Is A Water Heater?
An electric water heater warms up cold water and sends it directly to a faucet. This appliance is ideal for homes that have many bathrooms or require more hot water than usual.
The Different Water Heaters Available
There are two types of water heaters available: gas and electric. Gas-powered appliances tend to be cheaper in terms of installation costs, but they can cause higher utility bills. Electric appliances are usually more expensive to install, but they tend to be cheaper over the long term.
How Hard Is It To Install A Water Heater?
Installing a water heater can be difficult. But don’t worry; we’ve got you covered with these easy steps to follow!
- Prepare the space where you want to install your water heater by removing any furniture or appliances that’ll be in the way.
- Turn off all of the power going into and connect to your old water heater. If you have a fuse box, find it and turn off both sides for 20 minutes each. You can also look at your owner’s manual for how to disconnect your water heater.
- Once you’ve turned off the power, turn on the faucet that supplies cold water to your house so all of the pressure can be released from your pipes. If this doesn’t work after 30 minutes or so, use a plunger over each drain until it empties out.
- To access your water heater, you’ll need to remove any piping that connects to it. Make sure everything is disconnected before moving on to the next step.
- The new water heater should slide right in and connect to all of your old connections without a problem! If, for some reason, this doesn’t work, make sure all of your pipes are clear before moving on to the next step.
- It takes a little while for every water heater to start heating up, but you should be able to do so quickly once you turn on your power. If it’s not working properly or there are any problems with your installation (which shouldn’t happen if you followed these instructions), call a professional for help.
- As you can see, installing a water heater isn’t nearly as hard or complicated as it sounds! If you follow these easy instructions to the letter, nothing should go wrong when your family starts taking long showers in hot water again.
How to take care of your water heater?
If you follow these easy instructions to the letter, nothing should go wrong when your family starts taking long showers in hot water again.
- Replace anode rods every three years and drain sediment from the tank annually. If there is a leak or any other problems with your unit, contact a professional for help right away!
- Do not use harsh chemicals when draining sediment from your tank.
- Keep in mind that if you have a gas water heater, it will need to be inspected once every year by a professional. Keep the room around the unit clean and free of any combustible materials for safety reasons as well!
- You should turn off your heater before going on vacation or leaving the house for a long time.
- Keep your water heater at least three feet from any combustible materials to prevent fires and other accidents!
- If there is a leak, shut off the power immediately and contact a professional right away. Leaking can lead to very expensive repairs that you don’t want to deal with.
- Do not touch the water heater if it is wet or has been recently running hot water through it because you could be burned. If there are any problems, contact a professional to take care of them ASAP!
- Make sure that your water heater is out of the reach of children and pets – especially when it is hot.
- As you can see, there’s more to taking care of your water heater than meets the eye! Luckily, these steps are fairly easy and don’t take much time out of your day at all. Just make sure that if any problems arise or accidents happen, you contact a professional for help right away before things get worse!
As you can see, there’s more to taking care of your water heater than meets the eye! Luckily, these steps are fairly easy and don’t take much time out of your day at all. Just make sure that if any problems arise or accidents happen, you contact a professional for help right away before things get worse!
FAQs: Difficulty Installing Water Heater
How long does it take to install a water heater?
Depending on the size of your house, how many bathrooms you have, where you live in the country etc., installing a new water heater can be difficult. The average DIYer will need about an entire weekend to get the job done right.
How much does it cost to install a water heater?
The cost of installing your own tankless or standard electric, gas, or oil-fueled hot water heater can easily run you upwards of $1000.
How much does it cost to have a professional install my water heater?
The average cost for hiring a professional water heater installation company is around $1650.
Conclusion
To summarize, installing a water heater can be time-consuming and difficult if you’re not an expert in plumbing or electrical work. However, with this article as your guide, you’ll have all of the information that you need to successfully install your own water heater! We want to hear from you – what has been one of the more challenging aspects of installing a hot water tank? What was easier for you than expected? Leave us a comment below!