When you turn on the cold water, and it’s even colder than usual, there is a good chance that your shower head needs to be replaced. This blog post will deliver helpful tips and tricks for how to fix cold water in shower.
How to Fix Cold Water in Shower
Sometimes you might walk into the shower, and all you have is cold water. If your shower head is leaking, you need to replace it. Any homeowner with a little bit of know-how can do it.
Steps To Fix Cold Water in Shower
- First, locate the screw on top of your current showerhead and remove it using an adjustable wrench or pliers. If you cannot unscrew the old one, try removing the washer or replacing it with a new one.
- Once you have removed the showerhead, use sandpaper to remove any rust and grime from inside your pipe before screwing in your replacement head. Ensure to feed all of the threads through as far as they go so that there is no space between them and where water flows.
- Screw on the new showerhead, and make sure to tighten it as much as you can before turning your water back on again. If there is still cold water, try adjusting the temperature of it or replacing some internal parts within your bathtub faucet.
- Once you finish these steps, turn off both valves that are feeding into your bathtub faucet. With the water still off, turn on the showerhead until it is at its highest pressure before turning both of them back on again.
- If you are having trouble with this process, call a plumber to help get rid of cold water in the shower for good!
Other causes of cold water in the shower?
Some other common issues for cold water in the shower include a clogged showerhead, a shut-off valve that is not completely closed, and dirt stuck in the pipe within your bathtub.
How to fix a clogged showerhead?
If your showerhead is clogged, it’s easy to remove and replace by using a wrench or pliers. Once you remove the old one, you can simply use sandpaper to remove any dirt or rust stuck inside your pipe.
How to close a shut-off valve completely?
If there is a shut-off valve at the base of your shower, make sure it’s completely closed to avoid any issues with cold water.
How to fix dirt in the pipe?
Sometimes you might experience problems because of dirt inside the pipe that leads to your showerhead. To solve this problem, try cleaning out said part within the pipe and use a wire brush to remove any stuck-on dirt.
Cracked pipe
If you are experiencing cold water in the shower, it is likely that there is a hole or cracks somewhere within your piping. If left untreated, this can damage and rust other parts, causing even bigger problems down the line. Make sure to call a plumber if this happens as soon as possible!
Follow these steps: turn off both valves that are feeding into your bathtub faucet. With the water still off, turn on the showerhead until it is at its highest pressure before turning both of them back on again.
If you still have cold water
If there is still cold water, try adjusting the temperature of it or replacing some internal parts within your bathtub faucet. Once finished with these steps, turn off both valves that are feeding into your bathtub faucet. With the water still off, turn on the showerhead until it is at its highest pressure before turning both of them back on again.
How to Prevent Cold Water in Shower?
To prevent cold water in the shower from happening again, you should check all of these parts for leaks, rust, or any other problems before using them again. If you find any damaged parts, it is essential to replace them immediately in order to keep your water heater running safely.
If you have any trouble with these steps, contact a professional plumber for help.
Coldwater in the shower? Call A Plumber!
If you have cold water in the shower, call a plumber. They will be able to fix your problem for good and get rid of any rust or grime that might cause this issue again. The cold water issue may be due to a much bigger problem which only a trained professional can fix.
Helpful Coldwater fixing tips
Here are a few helpful tips and tricks for cold water in the shower:
Turn off both valves that feed into your bathtub faucet. With the water still off, turn on the showerhead until it is at its highest pressure before turning them back on again. If this doesn’t work, try adjusting or replacing some internal parts within your bathtub faucet.
FAQs: How to Fix Cold Water in Shower
Is replacing the showerhead will fix my cold water?
One of the ways to get rid of cold water in the shower is by simply fixing your old showerhead with a new one.
Why does it feel like my bathtub has low pressure after I replace the showerhead?
Sometimes, you might experience lower pressure if the new shower head is the same size as the old one. To fix this problem, call a plumber to help increase pressure or install a larger showerhead if possible.
Why do I have cold water in my bathtub area even though it’s coming out of my regular shower?
If you have problems with your regular shower, there might be a problem with the shut-off valve that is not completely closed.
Conclusion
If you’re one of the people who have experienced cold water in your shower, it may be time to replace your shower head.
There is a good chance that when this happens, there is some sort of debris or calcification built up on the inside surface, which prevents hot water from being mixed with cool water and heating things back up again.