Disclosure: As an Amazon Associate, Sweet Home Advisor earns from qualifying purchases. If you buy through links on this page, we may earn a small commission at no extra cost to you.
Water heaters rarely fail without warning. Most give you signs weeks or months before they stop working or start leaking: strange noises, rusty water, less hot water than usual. Spotting them early lets you repair a cheap part, or plan a replacement on your own schedule, instead of dealing with a cold shower or a flooded floor.
Here are the most common signs your water heater is going bad, what each one usually means, and whether it is worth repairing or time to replace it.
Warning signs at a glance
- Age over about 10 years (tank models)
- Rusty or discolored hot water
- Rumbling, popping or banging noises
- Water pooling around the base or leaks from the tank
- Less hot water or inconsistent temperature
- Rotten-egg smell from the hot water
- Rising energy bills with no change in use
1. Your water heater is over 10 years old
Age is the biggest single warning sign. Rheem says most conventional tank water heaters last around 10 years, and ENERGY STAR advises starting to plan a replacement once yours is more than 10 years old, before it fails. Tankless units usually last longer, often 20 years or more.
How to tell its age: look at the label on the side of the tank. The manufacture date is printed there or coded into the serial number. Each brand uses its own code; for example, see how to read the date code in our Bradford White guide.
2. Rusty or discolored hot water
Brown, red or rusty hot water can mean the inside of the tank is corroding or the anode rod (the part that protects the tank from rust) is used up. Check whether it happens only with hot water: if the cold water is also rusty, the problem may be your pipes or water supply instead.
What to do: if the tank is fairly young, replacing the anode rod and flushing the tank may fix it. If the heater is older and the rust keeps coming back, the tank itself is likely corroding and replacement is the safer choice.
3. Rumbling, popping or banging noises
These sounds usually come from sediment, minerals from your water that have settled at the bottom of the tank. As the burner or element heats the water, it bubbles up through the sediment layer and makes noise. Sediment also wastes energy and stresses the tank.
What to do: flush the tank. If the noise is mild and goes away, you’ve caught it in time. If it continues on an older heater, heavy sediment and wear mean the end is likely near.
4. Leaks or water around the base
Not every leak means a dead water heater. Leaks from loose fittings, the drain valve or the temperature and pressure (T&P) relief valve can often be repaired. But water seeping from the tank body itself almost always means internal corrosion, and the tank cannot be fixed.
What to do: find where the water is coming from. Tighten or replace fittings and valves if that’s the source. If the tank is leaking, turn off the power or gas and water supply and arrange a replacement soon, as a small leak can turn into a large one.
5. Not enough hot water, or temperature that comes and goes
Running out of hot water sooner than you used to, or water that swings between hot and lukewarm, can have several causes: sediment taking up space in the tank, a faulty thermostat, a burned-out heating element (electric), a broken dip tube, or simply a household that now uses more hot water than the heater was sized for.
What to do: thermostats, elements and dip tubes are relatively inexpensive repairs on a heater that is otherwise in good shape. Have a qualified technician diagnose the cause. If your hot water needs have grown, a larger tank or a correctly sized tankless unit may be the better fix; see our tankless sizing guide.
6. Smelly hot water
A rotten-egg (sulfur) smell from the hot water only is usually caused by bacteria reacting with the anode rod, not by a failing tank. It’s more common with well water or a heater that sits unused for long periods.
What to do: flushing the tank and swapping to an aluminum-zinc or powered anode rod often solves it. If the smell persists, a plumber can advise on treatment.
7. Rising energy bills
If your gas or electric bill creeps up without any change in how you use hot water, your heater may be losing efficiency, often from sediment build-up or worn components.
What to do: flush the tank and check the thermostat setting (around 120°F is enough for most homes). If the heater is old, a new, more efficient model may pay for itself over time.
Repair or replace?
| Situation | Usually |
|---|---|
| Heater under about 8 years, part failure (thermostat, element, valve, anode rod) | Repair |
| Leaking fitting, drain valve or T&P valve | Repair |
| Water leaking from the tank body | Replace |
| Over 10 years old with rust, noise or frequent problems | Replace |
| Repair cost approaching half the price of a new heater | Replace |
For a deeper look at timing and cost, read when should you replace a hot water heater.
Planning a replacement
Replacing a heater before it fails gives you time to compare options instead of taking whatever is available in an emergency. ENERGY STAR points out that this is the best moment to consider a more efficient heat pump water heater, which can qualify for rebates and federal tax credits. Start with our comparisons of tank vs tankless and gas vs electric water heaters.
Shop replacement anode rods on Amazon → | Water heater leak detectors →
Frequently asked questions
How long do water heaters last?
Most tank water heaters last around 8 to 12 years, with about 10 years typical. Tankless units often last 20 years or more with regular descaling.
Can a water heater explode?
It is very rare. The T&P relief valve is there to release excess pressure. That’s why it’s important to test it occasionally and never cap or block its discharge pipe. If the valve leaks constantly or you hear loud banging, call a plumber.
Is it safe to use a leaking water heater?
A small drip from a fitting is usually not dangerous but should be fixed soon. If the tank itself is leaking, shut off the power or gas and the water supply and plan a replacement, as the leak can get worse suddenly.
What is the most common cause of water heater failure?
Corrosion of the tank, usually after the anode rod has been used up. Sediment build-up speeds it along, which is why yearly flushing and periodic anode rod checks help a heater last longer.
Sources: Rheem (5 signs your water heater is going bad; repair vs replace), ENERGY STAR (when should you replace your water heater) and A. O. Smith maintenance guidance. This is general information; have gas and electrical repairs done by a licensed professional.