Home Water Filtration Guide: How to Choose the Right Water Filter

Disclosure: As an Amazon Associate, Sweet Home Advisor earns from qualifying purchases. If you buy through links on this page, we may earn a small commission at no extra cost to you.

The right home water filter depends on what is actually in your water. Start with your utility’s annual water quality report (or a lab test for well water), decide whether you need to treat one tap or the whole house, then choose the technology that targets your problem: activated carbon for chlorine and taste, reverse osmosis for dissolved contaminants like lead and PFAS, a softener for hardness, UV for bacteria. Finally, check that the product is certified to the matching NSF/ANSI standard.

Choosing a water filter in 4 steps

  1. Find out what’s in your water (utility report or lab test).
  2. Pick where to treat it: one tap (point-of-use) or the whole house (point-of-entry).
  3. Match the technology to the contaminant.
  4. Check the certification and the performance data sheet.

Step 1: Find out what’s in your water

The US Environmental Protection Agency (EPA) recommends starting with your goals. If you’re on city water, read your utility’s Consumer Confidence Report (CCR), usually published each summer. It lists detected contaminants and whether the utility disinfects with chlorine or chloramine. If you have a private well, test it with a state-certified lab, and retest periodically. A home water test kit is a useful quick check for hardness, chlorine and pH.

Step 2: Point-of-use or whole house?

Point-of-use (POU) Point-of-entry / whole house (POE)
Treats One tap or appliance All water entering the home
Examples Pitchers, faucet and inline filters, under-sink and refrigerator filters, shower filters Sediment and carbon tanks, softeners, whole-house UV
Typical cost About $20 to $600 About $850 to $5,400 installed (RO up to about $8,000)
Best for Drinking and cooking water Hardness, sediment, chlorine taste at every tap, well-water problems

The EPA notes that whole-house systems cost thousands of dollars and make the most sense when there is a consistent, significant problem with the water entering the home. For drinking water alone, a point-of-use filter is usually enough. Learn more in our whole house water filter guide.

Step 3: Match the technology to the problem

Technology Good at Not for
Activated carbon (pitchers, faucet, inline, whole-house carbon) Chlorine, taste and odor, many organic chemicals and chlorine byproducts; some certified models reduce lead and PFAS Nitrates, bacteria, dissolved minerals (hardness)
Catalytic carbon Chloramine (used by many US utilities instead of chlorine) Hardness, bacteria
Reverse osmosis (RO) Many dissolved contaminants: lead, arsenic, nitrates, fluoride, PFAS, total dissolved solids Removes beneficial minerals too; wastes some water; slow
Water softener (ion exchange) Calcium and magnesium (hardness, scale) Chemicals, bacteria; adds sodium; uses salt
UV disinfection Bacteria, viruses and cysts (well water) Any chemical contaminant; needs clear water
Sediment filter Sand, rust and silt; protects other equipment Dissolved contaminants
Distillation Nitrates, bacteria, heavy metals, dissolved solids Some volatile organics; energy-intensive

No single technology removes everything, so many systems combine them, for example sediment + carbon for the whole house plus RO at the kitchen sink.

Step 4: Check the certification

A filter’s box can claim almost anything. Independent certification to an NSF/ANSI standard (by NSF, WQA or IAPMO) shows it was tested. Then check the product’s performance data sheet to confirm it lists your specific contaminant.

Standard What it covers
NSF/ANSI 42 Aesthetic effects: chlorine, taste and odor (point-of-use or whole house)
NSF/ANSI 53 Health-related contaminants such as lead, using EPA and Health Canada limits
NSF/ANSI 58 Reverse osmosis systems
NSF/ANSI 401 Up to 15 emerging contaminants, such as certain pharmaceuticals
NSF/ANSI 44 Water softeners (hardness reduction)
NSF/ANSI 55 UV systems (Class A disinfects microbiologically unsafe water)
NSF/ANSI 62 Distillation systems
NSF/ANSI 177 Shower filters (free chlorine only)

Which filter for which problem?

Your problem Usually the best fit
Chlorine taste or smell in drinking water Carbon pitcher, faucet or inline filter (NSF/ANSI 42)
Lead from old pipes Point-of-use filter certified to NSF/ANSI 53 for lead, or RO (NSF/ANSI 58)
PFAS (“forever chemicals”) RO or a carbon filter certified for PFOA/PFOS reduction
Hard water, scale, spotty dishes Water softener (NSF/ANSI 44)
Chlorine or chloramine at every tap Whole-house carbon or catalytic carbon
Sediment, rust or iron (often well water) Whole-house sediment and iron filtration
Bacteria in a private well UV system (NSF/ANSI 55 Class A), after fixing the source and testing
Dry skin or hair from chlorinated shower water Shower filter (NSF/ANSI 177)
Fridge water and ice Certified refrigerator filter
Camping, travel, emergencies Portable water filter

Maintenance: the part people forget

  • Change filters on schedule. The EPA warns that a neglected filter can make water quality worse, not better.
  • Budget for replacements: carbon and sediment cartridges typically cost $15 to $65 each; RO membranes and UV lamps cost more.
  • Retest occasionally to confirm the system is still working.
  • Choose water-efficient RO: WaterSense-labeled RO systems send 2.3 gallons or less to the drain for each gallon of treated water.

Browse NSF-certified water filters on Amazon →  |  Water test kits →

Frequently asked questions

What is the best type of water filter for a home?

It depends on your water. For most city homes, a certified carbon filter for drinking water is enough. For lead, PFAS or high dissolved solids, reverse osmosis is more thorough. Hard water needs a softener, and well water often needs sediment, iron and UV treatment.

Do I need a whole house water filter?

Only if you have a problem that affects every tap, such as hardness, sediment, iron or a strong chlorine or chloramine taste. For drinking water alone, a point-of-use filter is cheaper. See our whole house water filter guide.

Do water filters remove fluoride?

Standard carbon filters remove little fluoride. Reverse osmosis and distillation reduce it substantially.

Does a water filter soften water?

No. Filters don’t remove the calcium and magnesium that cause hardness; a water softener does.

Sources: US EPA home water treatment guide (2024), NSF standards for water treatment systems, Water Quality Association chloramine fact sheet, and HomeGuide water filtration cost data. This guide is general information; for health concerns, test your water with a certified laboratory.

Leave a Comment