Water Softener vs Water Filter: Which Do You Need?

Disclosure: As an Amazon Associate, Sweet Home Advisor earns from qualifying purchases. If you buy through links on this page, we may earn a small commission at no extra cost to you.

A water softener and a water filter solve different problems. A softener removes the calcium and magnesium that make water “hard” and leave scale on fixtures, appliances and water heaters. A water filter reduces contaminants that affect taste, smell or health, such as chlorine, sediment, lead or chemicals. A softener does not purify water, and most filters do not soften it, so many homes with hard water and other water problems use both.

Quick answer

  • Get a softener if you see white crusty scale, spotty dishes, soap that won’t lather, or a test shows over about 7 grains per gallon (120 mg/L) of hardness.
  • Get a filter if your water tastes or smells of chlorine, looks cloudy, or a test shows lead, PFAS or other contaminants.
  • Get both if you have hard water and other problems. The usual order is sediment filter, then softener, then a drinking-water filter or RO at the kitchen sink.

Water softener vs water filter at a glance

Water softener Water filter
Main job Removes hardness minerals (calcium and magnesium) Reduces contaminants (chlorine, sediment, lead, chemicals, and more, depending on the filter)
How it works Ion exchange: resin swaps hardness minerals for sodium or potassium Physical straining, activated carbon adsorption, or membranes (reverse osmosis)
Makes water safer to drink? No, softening is not purification Yes, for the contaminants it’s certified to reduce
Stops scale? Yes Generally no (except RO, for the water it treats)
Where it goes Whole house, where water enters Whole house, under the sink, a faucet, a pitcher, the fridge or the shower
Ongoing cost Salt, about $60 to $120 a year Replacement cartridges
Certification to look for NSF/ANSI 44 NSF/ANSI 42, 53, 401 or 58, depending on type

How does a water softener work?

Most home softeners use ion exchange. Water flows through a tank of resin beads coated with sodium ions. The resin grabs calcium and magnesium and releases sodium in their place. When the resin is full, the softener regenerates: it rinses the resin with salty brine from a second tank, flushing the hardness minerals down the drain. Penn State Extension notes that each regeneration uses about 50 gallons of water.

Modern softeners usually regenerate based on how much water you’ve used (metered or demand-initiated), which wastes less salt and water than timer-based models.

What about salt-free softeners? So-called salt-free “conditioners” don’t remove hardness minerals. They change them so they’re less likely to form scale. They need no salt or drain but don’t give you the slippery feel of softened water, and their results vary in very hard water.

How does a water filter work?

Water filters trap or remove contaminants. The main types are:

  • Sediment filters: catch sand, rust and grit.
  • Activated carbon filters: reduce chlorine, taste, odor and many chemicals. This is what most pitcher, faucet, fridge and whole-house filters use.
  • Reverse osmosis: forces water through a membrane to remove dissolved contaminants like lead, nitrate and fluoride. See what is reverse osmosis?
  • Specialty media: iron and manganese filters, UV disinfection for bacteria, and more.

For a full overview, read our home water filtration guide.

How hard is your water?

Classification Grains per gallon (gpg) mg/L (ppm)
Soft Under 1.0 Under 17
Slightly hard 1.0 to 3.5 17 to 60
Moderately hard 3.5 to 7.0 60 to 120
Hard 7.0 to 10.5 120 to 180
Very hard Over 10.5 Over 180

Classification from Penn State Extension. 1 gpg is about 17 mg/L.

Find your number on your utility’s annual water quality report, or use a hardness test strip or kit. Hard water isn’t a health risk; it’s a nuisance that causes scale, but scale can shorten the life of a water heater. See how long water heaters last and how to flush a water heater.

Signs you need a softener, a filter, or both

What you notice Likely cause What helps
White crust on faucets and showerheads Hard water Softener
Spotty dishes and glasses Hard water Softener
Soap and shampoo won’t lather Hard water Softener
Chlorine or “pool” smell Disinfectant in city water Carbon filter
Cloudy water or grit Sediment Sediment filter
Orange or brown stains Iron or manganese Iron filter (some softeners handle low levels)
Rotten-egg smell Hydrogen sulfide Specialty filter; get a water test
Lead, PFAS or nitrate in a test Contaminants Certified filter or RO

Cost: water softener vs water filter

System Typical price Ongoing costs
Salt-based softener (single tank) About $500 to $1,700 Salt about $60 to $120 a year
Dual-tank softener About $1,000 to $5,000 Salt
Salt-free conditioner About $800 to $4,000 Media replacement every few years
Softener installation About $150 to $1,000 (most $500 to $700) Optional yearly service $150 to $300
Under-sink RO system, installed About $150 to $1,300 Filters and a membrane every 3 to 5 years
Whole-house filter See our whole-house filter guide Cartridges or media

Ranges from This Old House softener (June 2026) and reverse osmosis (March 2026) cost guides. Salt estimate based on $5 to $10 per 40 lb bag lasting 6 to 8 weeks.

Can you use a water softener and a filter together?

Yes, and it’s common. A typical setup is:

  1. Sediment filter where water enters, to protect everything after it.
  2. Whole-house carbon filter (optional) for chlorine.
  3. Water softener for hardness.
  4. Drinking-water filter or RO at the kitchen sink, which also removes the small amount of sodium a softener adds.

On well water with iron, an iron filter usually goes before the softener, because iron can foul the resin.

Water hardness test strips on Amazon →  |  Water softeners →

Frequently asked questions

Does a water softener purify water?

No. A softener removes hardness minerals but doesn’t remove contaminants like bacteria, lead or chemicals. Use a certified filter for those.

Is softened water safe to drink?

For most people, yes. Softening adds a small amount of sodium (about 7.5 mg per quart for each grain per gallon of hardness removed, according to Penn State Extension). If you’re on a low-sodium diet, drink filtered or RO water, or use potassium chloride instead of salt.

Does a water filter remove hardness?

Most don’t. Carbon and sediment filters leave calcium and magnesium in the water. Reverse osmosis removes them from the water it treats, but it’s usually installed at one sink.

Which is better for hard water, a softener or a filter?

A softener. It’s the only common whole-house treatment designed to stop scale.

Do I need a softener if I’m on city water?

Only if your water is hard. City water is treated for safety, not hardness, so check your utility’s water report.

Sources: Penn State Extension (water softening), This Old House water softener cost guide (June 2026) and reverse osmosis cost guide (March 2026), US Department of Energy softener buying guidance, University of Massachusetts Extension (reverse osmosis). Test your water before choosing a treatment.

Leave a Comment