Activated Carbon Water Filters: How They Work and What They Remove

Disclosure: As an Amazon Associate, Sweet Home Advisor earns from qualifying purchases. If you buy through links on this page, we may earn a small commission at no extra cost to you.

An activated carbon water filter works by adsorption: contaminants stick to the surface of highly porous carbon particles as water flows through. It’s very good at removing chlorine, chloramine, bad tastes and odors, and many organic chemicals such as some pesticides, solvents and disinfection byproducts. It does not remove bacteria, hardness minerals, nitrate or fluoride, and removes most metals only if specially designed to. That’s why carbon is often combined with sediment filters, softeners or reverse osmosis.

Activated carbon at a glance

  • Removes: chlorine, chloramine, taste and odor, many organic chemicals, some pesticides, disinfection byproducts
  • Doesn’t remove: bacteria and viruses, hardness, nitrate, fluoride, most metals
  • Lead: only filters specifically certified for it (NSF/ANSI 53)
  • Replace: on time; performance drops as the carbon fills up

Based on University of Nebraska-Lincoln Extension’s guide to activated carbon filtration.

How activated carbon filters work

Activated carbon is made from coal, coconut shells or wood that’s heated with steam to create a huge network of tiny pores. As water passes through, contaminant molecules stick to the carbon’s surface, a process called adsorption. How well it works depends on the type of carbon, the contaminant, how long the water stays in contact with the carbon, and how many other chemicals compete for space. Once the surface is full, contaminants can break through into your water.

GAC vs carbon block

Granular activated carbon (GAC) Carbon block
Form Loose granules Compressed solid block
Flow rate Higher Lower
Contact time and filtration Less contact, can channel More contact, filters finer particles
Common in Whole-house tanks, some pitchers Under-sink, faucet and fridge filters

What activated carbon removes and doesn’t remove

Removes or reduces Doesn’t remove
Chlorine and chloramine Bacteria and viruses
Taste and odor compounds Hardness (calcium, magnesium)
Some solvents and pesticides (such as atrazine) Nitrate
Some disinfection byproducts (trihalomethanes) Fluoride
Radon (point-of-entry systems) Most metals (unless specially designed)
Lead, when certified for it Dissolved salts

From University of Nebraska-Lincoln Extension G1489.

Need lead, PFAS or microplastics removed? Check the certified claims; see do water filters remove microplastics and lead and does a water filter remove PFAS. For hardness, you need a water softener.

Types of activated carbon filters

Carbon block filters on Amazon →

How often to replace a carbon filter

Follow the gallon rating. UNL Extension suggests estimating life by dividing the rated capacity by your daily use (about 1 gallon per person for drinking, plus 1 to 3 gallons per household for cooking), and notes that performance dropped significantly after about 75% of rated life in testing, so replacing a little early is safer. Replace sooner if taste, odor or flow changes. A sediment prefilter extends carbon life.

Can bacteria grow in carbon filters?

Yes. Carbon traps organic matter that bacteria can feed on, especially in a filter that sits unused or is past its life. For healthy people the risk from these harmless bacteria is low, but infants, older adults and people with weakened immune systems may want to take extra care. UNL Extension suggests running water for about 30 seconds after the filter has been idle, and changing cartridges on time.

Frequently asked questions

Is activated carbon the same as charcoal?

Similar material, but activated carbon is processed to have far more surface area, which makes it much better at adsorbing contaminants.

Does activated carbon remove fluoride?

No. Fluoride needs reverse osmosis or activated alumina.

Does activated carbon soften water?

No. It doesn’t remove calcium or magnesium.

Does a carbon filter remove bacteria?

No. If bacteria are a concern, use disinfection (such as UV) or a certified microbiological filter.

Sources: University of Nebraska-Lincoln Extension G1489 “Drinking Water Treatment: Activated Carbon Filtration”; NSF certification information. Test your water to choose the right treatment.

Leave a Comment