Disclosure: As an Amazon Associate, Sweet Home Advisor earns from qualifying purchases. If you buy through links on this page, we may earn a small commission at no extra cost to you.
The best way to test your water depends on what you’re worried about. Cheap test strips and digital TDS meters are fine for quick checks of hardness, pH, chlorine and dissolved solids. For health-related contaminants such as lead, arsenic, nitrate, bacteria or PFAS, use a certified laboratory. If you’re on a private well, the CDC recommends testing at least once a year for total coliform bacteria, nitrates, total dissolved solids and pH.
Quick answer
- City water: start with your utility’s free annual water quality report, then test at the tap for lead if your home has older plumbing
- Private well: test every year with a state-certified lab (bacteria, nitrate, pH, TDS), plus local concerns
- Quick checks: test strips (about $9 to $27) and TDS meters (about $14)
- Health decisions: rely on lab results, not strips
Types of water tests
| Type | Typical cost | Good for | Limits |
|---|---|---|---|
| Hardness test strips | About $9 for 150 strips | Sizing a water softener; checking softener output | Hardness only |
| Multi-parameter strips (e.g. VARIFY 17-in-1) | About $21 to $27 | Screening pH, hardness, iron, copper, chlorine and more; some include bacteria tests | Approximate color readings; not precise enough for health decisions |
| Digital TDS meter | About $14 | Checking total dissolved solids, e.g. whether an RO system is working | Doesn’t say what is dissolved |
| Well water strip kits | Varies | Screening nitrate, nitrite, bacteria, hydrogen sulfide | Screening only |
| Certified lab test | Higher; depends on the panel | Lead, arsenic, nitrate, bacteria, PFAS, uranium, VOCs | Takes days; costs more |
Strip and meter prices from This Old House’s water test kit guide (May 2026). Lab prices vary by state and panel.
When to use a certified lab
Use a state-certified lab, not just strips, if you need to know about:
- Lead (especially in homes built before 1986 or with lead service lines)
- Bacteria (wells, after flooding or well repairs)
- Nitrate (wells near farms; important for infants)
- Arsenic, uranium or other metals common in your region
- PFAS (“forever chemicals”); see does a water filter remove PFAS?
Your state or local health department can give you a list of certified labs, and some offer low-cost well tests.
How often to test well water
The CDC recommends testing private wells at least once a year for total coliform bacteria, nitrates, total dissolved solids and pH, and testing sooner if:
- You hear about water problems in your area
- There’s been flooding, ground disturbance or a waste site nearby
- You’ve repaired or replaced any part of the well
- Your water’s taste, color or smell changes
- Someone in the home becomes pregnant, or a child comes to live with you
Testing city water
- Read your Consumer Confidence Report. Utilities publish one every year showing what they found in the water they deliver.
- Test at your tap for lead if your home has older pipes, solder or fixtures; the utility’s report can’t show what your own plumbing adds.
- Use strips or a meter for hardness and chlorine if you’re choosing a softener or filter. See what is hard water?
How to take a water sample
- Follow the kit or lab instructions exactly; some tests need the first draw after water sits overnight (lead), others need running water first.
- Use the lab’s sterile bottle for bacteria and don’t touch the inside.
- Remove aerators if the instructions say so.
- Keep samples cold and ship or deliver them within the stated time.
What to do with your results
| Result | Next step |
|---|---|
| Hard water | Water softener |
| Chlorine taste and odor | Carbon filter or pitcher |
| Lead | Certified NSF/ANSI 53 filter for lead; see under-sink filters |
| Nitrate, fluoride, high TDS | Reverse osmosis |
| Bacteria in a well | Shock chlorination and retest; consider UV; contact your health department |
| Sediment, iron, sulfur smell | See whole-house filters |
Hardness test strips on Amazon → | Drinking water test kits → | TDS meters →
Frequently asked questions
Are home water test kits accurate?
Strips are fine for screening and for things like hardness and pH, but they’re approximate. For lead, bacteria, nitrate or PFAS, use a certified lab.
How often should I test my water?
Private wells: at least once a year (CDC). City water: check the annual report and test for lead at the tap if you have older plumbing.
What does a TDS meter tell you?
The total amount of dissolved solids, useful for checking a reverse osmosis system. It doesn’t identify specific contaminants.
Where can I get my water tested?
Your state or local health department can provide a list of certified labs; some offer free or low-cost well tests.
Sources: CDC “Guidelines for testing well water,” US EPA private well guidance, This Old House best water test kits (May 2026). This article is general information; follow your health department’s advice for your area.